Dark Matter eLiquid
Enjoy the wonderful flavor of our latest VapeSafe eLiquid - Dark Matter.
Dark Matter tastes like German chocolate cake. For those of you who have not had the fortunate to try a piece German chocolate cake recently, this is a great way to experience the flavor without getting any of the calories. German chocolate cake is a layered cake filled and topped with a coconut-pecan frosting. Traditionally sweet baking chocolate is used for the chocolate flavor in the actual cake. The robust filling and topping is a caramel made with egg yolks and evaporated milk. Once the caramel is cooked, coconut and pecans are stirred into the mixture. Finally, rich chocolate frosting is spread around the sides of the cake to hold in the filling.
Dark Matter eLiquid by VapeSafe captures the essence of German chocolate cake. Dark Matter eLiquid delivers plumes of vapor and rich chocolatey flavor that you'll want to enjoy again and again. Try Dark Matter today!
Technology Information:
The DSE701 eCigar looks and works like a real cigar without the offensive smell. The DSE701 Rechargeable eCigar emits a pleasant smell that dissipates within seconds. The large plumes of vapor created by the DSE701 eCigar will, no doubt, please your nicotine cravings.
Unlike a real cigar, the DSE701 eCigar is designed to replace an occasional vape from a cigar or cigarette. Continual, non-stop vaping may overheat the atomizer and cause a premature failure. This will void the warranty on the atomizer. If you use the DSE701 eCigar atomizer under normal conditions, it will last much longer. If you need to replace the atomizer, you will be replacing the entire DSE701 Rechargeable eCigar body.
The arch-shaped atomizer is located inside the DSE701 eCigar body. The DSE701 eCigar atomizer serves as the heating element that vaporizes the eLiquid in the cartridge so that it can be vaped. When vaped, the eCigar cartridge creates large plumes of vapor that appear as if you are smoking a traditional cigarette. These vapors carry a pleasant smell with them until they dissipate a few seconds after vaping.
The eCigar consists of a stainless steel shell, rechargeable lithium battery, micro-electronic circuit, atomizing chamber and red indicator LED at the end of the DSE701 eCigar.
The DSE701 Two-Piece Rechargeable eCigar Kit includes:
- 1 × eCigar Atomizer Tube (Wood Grain Design with Red LED)
- 2 × eCigar Cartridges (1 x High 16mg and 1 x Medium 11mg, Cigar-Flavored Nicotine eLiquid)
- 2 × eCigar 3.6 volt, 360 mAh Lithium Rechargeable Batteries
- 1 × eCigar Charger
- 1 × eCigar User Manual
- 3 × eCigar Mouthpiece Sheaths
The first time you charge the DSE701 eCigar battery, you should let it charge for at least eight hours. All consecutive charges should be from two to three hours long.
The positive end of the battery should be placed closest to the LED at the end of the eCigar. The positive end of the eCigar battery is marked with a plus sign and has a bump on the end of it. Simply push the LED down on the battery and screw it back into place. The LED will light up red when the connection is made.
The batteries will have some charge when you first receive them, but will still need the first, full eight-hour charge. When the battery and charger are plugged into an electrical outlet, the light on the charger will turn red. When the light on the DSE701 charger turns green, it doesn't necessarily mean that the battery is fully charged. Though the LED is a convenient indicator to let you know when a battery is fully charged, it isn't always accurate.
The function recovery mode should be used once or twice every 14 to 28 days. Before performing this function, remove the mouthpiece/cartridge so that it doesn't melt. This function heats the atomizer to a higher than normal temperature. It burns off the eLiquid residue from the atomizer. By doing this, it self-cleans the atomizer and allows for greater vapor production. To use the function recovery mode, insert a thin safety or push pin into the hole, towards the end of the DSE701 eCigar tube. Hold it down for 10 to 20 seconds. The red LED will stay lit and you will hear a low, crackling sound. Vapor will begin to pass out the top of the eCigar tube. If you do not have a thin pin on hand, you can also put the LED end of the DSE701 eCigar tube into your mouth and blow through the hole to heat the atomizer. While blowing steadily for 10 to 20 seconds, you will see large amounts of vapor pass from the end where the mouthpiece would normally be. It is quite fun to watch actually, but don't overdo it. If you overuse this function, the atomizer could be destroyed and not work correctly.
Refill your cartridges often. Depending on how heavily you vape, you may have to add a few drops of eLiquid to your cartridge every 8 to 10 vapes to help keep the cartridge moist. A dry cartridge might cause the atomizer to overheat and become permanently damaged. You also want to be careful that you do not overfill the cartridge, as it could drip down below the atomizer and damage the circuitry.
DSE701 eCigar Specifications:
- DSE701 eCigar Length: 148mm
- Diameter of the eCigar: 13.8mm
- Weight of DSE701 eCigar: 35.2 grams
- DSE701 eCigar Cartridge Contains: 1.7 grams of nicotine content
- Vapes per Cartridge: 300 (approximately 20 cigars worth)
- DSE701 eCigar Battery Charging Time: 2 to 3 hours
- Battery Life of the DSE701 eCigar: 300 times in the charger
- Input Supply Voltage of Charger: AC 110 volt to 240 volt, 50/60Hz